1 |
Synthesis of LTO nanorods with Ac/nano-Si composite as anode material for Lithium-ion batteries
|
International Journal of Technology, Volume 9, Issue 6, 1 December 2018, Pages 1225-1235 |
|
2 |
Microfibrillated cellulose (MFC) isolation based on stalk sweet sorghum through alkalinization-bleaching treatment: Effect of soaking temperature
|
IOP Conference Series: Materials Science and EngineeringVolume 509, Issue 1, 3 May 2019, Article number 012079 |
|
3 |
Effect of strontium on the microstructure and mechanical properties of aluminium ADC12/Nano-SiC composite with Al-5TiB grain refiner by stir casting method
syahrialetal_2019_mater._res._express_10.1088_2053-1591_ab0a49.pdf |
Materials Research Express, Volume 6, Issue 7, 10 April 2019, Article number 074002 |
|
4 |
Effect of Graphite Addition on Mechanical Properties of Bronze Bearing Cu-Sn-Zn+C Graphite Produced by Powder Metallurgy, Meeting: Materials Science & Technology 2006 (MS&TM06): A.Zulfia dan M.Jatmiko
|
Symposium : Processing for Reliability, TMS, Cincinnati, OHIO, USA |
|
5 |
Evaluation of Graphite Composites Bipolar Plate from Electric Arc Furnace waste for Polymer Electrolyte Membran Fuel Cell (PEMFC): Y. Sadeli, A. Zulfia, B. Prihandoko, J. Wahyuadi and MZ. Azizi
|
Proceeding International Conference on Materials Procerssing Technology 2110, January 5-6, 2010, Bangkok, Thailand |
|
6 |
Komposit Polimer Konduktif Sebagai Material Energi untuk Plat Bipolar Pada Polimer Electrolit Membran Fuel Cell (PEMFC): A. Zulfia, M. Hatta.A dan Verina WD
|
Proceeding Seminar Nasional (SMART 2009), UGM, Jogyakarta 22 Juli 2009 |
|
7 |
Metal Oxide Deposition on the Surface of SiC Particles to Produce Al/SiC Composites by Powder Metallurgy Method: M. Zainuri, Anne Z. Dedi. P dan Eddy S
|
Proceeding International Conference on Materials And Metallurgical Technology 2009 (ICOMMET2009), 24-25 Juni 2009 |
|
8 |
Carbon Studies On The Oil Palm Fibers for Gas Diffusion Layer Material, pp.1045-1050:
|
|
|
9 |
Analysis of Coconut Carbon Fibers for Gas Diffusion Layer MaterialaEUR , A318: Nanik Indayaningsih, Dedi Priadi, Anne Zulfia, Suprapedi,
|
|
|
10 |
Analysis of Coconut Carbon Fibers for Gas Diffusion Layer MaterialaEUR , A318: Nanik Indayaningsih, Dedi Priadi, Anne Zulfia, Suprapedi,
|
Proceedings The 8th International Conference on Fracture and Strength of Solids 2010 (FEOFS 2010), Kuala Lumpur, Malaysia, ISBN 978-983-44698-3-2, |
|
11 |
Carbon Studies On The Oil Palm Fibers for Gas Diffusion Layer Material, pp.1045-1050: Nanik Indayaningsih, Anne Zulfia, Dedi Priadi, Evvy Kartini
|
Proceeding 12th Asian Conference on Solid State Ionics and 15th Chinese Conference on Solid State Ionics, Fundamental Researches and Technological Applications, Wuhan China, ISBN 978-7-5629-3159-1 |
|
12 |
Effect of Mg on Producing Metal Oxide Coating on SiC Particles, pp.77-82: A.Zulfia and T. MasaEURTMudah
|
Proceeding on 14th European Conferences on Composites Materials, Budapest, Hungary |
|
13 |
Karakteristik Komposit Laminat Hibrid Al/SiC-Al/Al2O3 Produk Metalurgi Serbuk : Anne Zulfia, Nurmawati dan Widyastuti
|
Prosiding Seminar Nasional Metalurgi an Material (SENAM IV), Untirta, Cilegon, 2010 |
|
14 |
Al-Si/SiC Metal Matrix Composites Produced by Spontaneous infiltration: Anne Zulfia
|
Advanced Materials Research Vol. 277 (2011) pp 21-26 |
|
15 |
Analysis of Cococnut Carbon Fibers For Gas Diffusion Layer Materials : Nanik Indayaningsih, Dedi Priadi, Anne Zulfia, Suprapedi
|
Key Engineering Materials, Vols. 462-463 (2011) pp.937-942 |
|
16 |
Pengaruh Temperatur Sinter dan Fraksi Volume Penguat Al2O3 Terhadap Karaktersitik Komposit Laminat Hibrid Al/SiC-Al/Al2O3 Produk Metalurgi Serbuk: Anne. Z, Franciska PL, dan Widyastuti
|
Proceeding Seminar Nasional (SNTM) Universitas Petra, 30 Juni 2009 |
|
17 |
Pengaruh Karbon terhadap Karakterisasi Komposit Polimer Polipropilena (PP) dengan aditif Maleated-Anhydrite-Grafted-Polypropilene (PP-g-MA) Sebagai Material Pelat Bipolar: A. Zulfia, Verina.WD, dan Yoghi.S
|
Prosiding Seminar Nasional Kluster Riset Teknik Mesin 2009, Potensi Pengembangan Energi Terbarukan Dan Material Pendukung Konstruksi Energi Terbarukan, Surakarta, 13-14 Oktober 2009, pp.144-148 |
|
18 |
Effect of Mg on Interfacial Reaction in the system of Al/SiC Metal Matrix Composites produced by Spontaneous Infiltration: Anne Zulfia
|
Indonesian Nanoletter, Special Issue Proceeding of International Seminar of Advanced Material Processing and Integrity, ISSN 1907-803X, Vol.2, N0.3, October 2008, pp 5-12 |
|
19 |
Karakterisasi Komposit Bronze Bearing Cu-Sn-Zn+C Grafit Produk Metalurgi Serbuk: A.Zulfia, M. Jatmiko dan C.Isminarto
|
Prosiding Seminar Nasional Metalurgi dan Material 2, ITB, 20-21 Agustus 2008 |
|
20 |
Pengaruh Deposisi Fase (AlMg) Oksida pada Permukaan Partikel Penguat SiC Terhadap Wettability Komposit Isotropik Al-SiCp: M.Zainuri, Eddy S Siradj. Dedi Priadi, Anne Zulfia dan Darminto
|
Jurnal Teknologi, Edisi No. 2, Tahun XXII, Juni 2008, pp. 108-117 |
|
21 |
Pengaruh Grafit Terhadap Karakteristik Komposit Logam Al-C Produk Metalurgi Serbuk Dengan Wetting Agent Tembaga: A. Zulfia, A.A. Rizkiyani dan D. Ekawati
|
Prosiding Seminar Nasional Sains&Teknologi-II, Universitas Lampung, 17-18 November 2008 |
|
22 |
The Effect of Ball Mill Time on Electrolyte Composites of Lithium Battery: B. Prihandoko, P. Sardjono, A. Zulfia
|
Proceeding Advanced Materials Science and Nano Technology, Hanoi, Vietnam, Sept 15-21, 2008 |
|
23 |
The Effect of Ball Mill Time on ElectrolyteComposites of Lithium Battery: B. Prihandoko, P. Sardjono, A. Zulfia
|
Proceeding Advanced Materials Science and Nano Technology, Hanoi, Vietnam |
|
24 |
Analisis Sifat Mekanik dan Konduktivitas Komposit Polipropilena/Etilena-Propilena-Diena Terpolimer/Karbon (PP/EPDM/C) untuk Aplikasi Pelat Bipolar pada Polymer Electrolyte Membrane (PEM) Fuel Cell: Anne.Zulfia, M. Hatta. Adam dan Verina.WD
|
Material Komponen dan Konstruksi (Akreditasi B) ISSN 0852-4866, Juni 2009 |
|
25 |
Carbon Analysis produced by High Rise Combustion of Palm Fibre: Nanik Indayaningsih, Anne Zulfia, Dedi Priadi, Sunit Hendrana
|
Proceeding International QIR 2009, 3-6Agustus 2009 |
|
26 |
Conductivity of Lithium Battery Electrolyte under Influence of Milling Time: Bambang.P and Anne Z
|
Proceeding International Conference on Materials And Metallurgical Technology 2009 (ICOMMET2009), 24-25 Juni 2009 |
|
27 |
Effect of Firing on Producing SiC/Al Cermiac Matrix Composite by Directed Melt Oxidation: A.Zulfia, F. Isabela. G.N. Anastasia
|
Proceeding International QIR 2009, 3-6Agustus 2009 |
|
28 |
Effect of Graphite on Characterisation of Bronze Bearing Cu-Sn-Zn+C Produced by Powder Metallurgy: A. Zulfia, I.Nyoman J and J. Raharjo
|
Proceeding International Conference on Materials And Metallurgical Technology 2009 (ICOMMET2009), 24-25 Juni 2009 |
|
29 |
Effect of SiC on The Interface bonding of Al/SiC-Al/Al2O3 Laminate Hybrid Composites: A.Zulfia, Widyastuti and Zainuri
|
6th International Conference High Temperatur Capillarity, Athens 6-9 May 2009 |
|
30 |
Effect of Artificial Aging (T6) on Microstructure of Al-AC8H/Al2O3 MMC Produced by Stir Casting Route: Anne. Zulfia and Maman Kartaman Ajiriyanto
|
Advanced Materials Research Vols. 328-330 (2011), Mechatronics and Materials Processing I, pp 1552-1555 |
|
31 |
Effect of Mg on Formation of Electroless Plating on the Surface of SiC Particles Reinforced Composites: Anne Zulfia, Widyastuti and Mochamad Zainuri
|
Journal of Materials Science and Engineering Volume 4, Number 12, Desember 2010 Serial Number 37, ISSN 1934-8959, pp. 12-17. |
|
32 |
Conductivity of Lithium Battery Electrolyte under Influence of Milling Time
az3.pdf |
|
|
33 |
The Effect of Composition Variation of LTP on a Quenched Windows Glasses: Bambang Prihandoko, Priyo Sardjono, Anne Zulfia dan Eddy S.Siradj
az6.pdf |
The 9th International Conference on Quality in Research, (QIR), IMM 02/1-5 |
|
34 |
Characterisation of Bronze Bearing Cu-Sn-Zn+C Graphite Produced by Powder Metallurgy: A. Zulfia, J. Mario, N. Jujur, J. Rahardjo
az1.pdf |
Proceeding on One Day Seminar on Advanced Materials, Advanced Materials Resetrach Group, UKM, Malaysia |
|
35 |
Pengaruh Beban Kompaksi Terhadap Karakteristik Material Bantalan Perunggu (Cu-Sn-Zn-Grafit) Produk Metalurgi Serbuk: Anne Zulfia, Ibnu Z.A, I. Nyoman J, Jarot R.
az4.pdf |
Seminar Nasional Metalurgi dan Material I 2007, Hotel Makara UI, Depok |
|
36 |
Pengaruh Mg Terhadap Karakteristik Komposit Matriks Keramik ZrO2/Al Produk Directed Metal Oxidation (DIMOX): Anne Zulfia, Eko Ontorjo, Dede Bangunsuprayogi, Ihwan Hidayat
az3.pdf |
Seminar Nasional Metalurgi dan Material I 2007, Hotel Makara UI, Depok |
|
37 |
Pengaruh Pelapisan HNO3 Terhadap Densitas Komposit Lamina Isotropik Al/Al2O3 - Al/SiC: Widyastuti, Anne Zulfia, Dedi Priadi, Johny Wahyuadi, Eddy S. Siradj
az5.pdf |
Seminar Nasional Metalurgi dan Material I 2007, Hotel Makara UI, Depok |
|
38 |
Effect of Mg on Interfacial Reaction in The System of Al/SiC Metal Matrix Composites Produced by Spontaneous Infiltration
az0.pdf |
International Seminar of Advanced Materials Processing and Integrity
28 October 2008, PUSPITEK, Tangerang, Indonesia |
|
39 |
Pengaruh Karbon Terhadap Karakterisasi Komposit Polimer Polipropilena (PP) dengan Aditif Maleated-Anhydride -Grafted Polypropylene (PP-G-MA) sebagai Material Plat Bipolar
az0.pdf |
Seminar Nasional Kluster Riset Teknik Mesin 2009 |
|
40 |
Pengaruh Temperatur Sinter dan Fraksi Volum Penguat Al2O3 Terhadap Karakterisasi Komposit Laminat Hibrid Al/SiC-Al/Al2O3 Produk Metalurgi Serbuk
az1.pdf |
Seminar Nasional Teknik Mesin 4
30 Juni 2009, UK Petra Surabaya |
|
41 |
Komposit Polimer Konduktif Sebagai Material Energi untuk Plat Bipolar Pada Polimer Electrolit Membran Fuel Cell (PEMFC): A. Zulfia, M. Hatta.A dan Verina WD
az5.pdf |
Proceeding Seminar Nasional (SMART 2009), UGM, Jogyakarta 22 Juli 2009 |
|
42 |
Metal Oxide Deposition on the Surface of SiC Particles to Produce Al/SiC Composites by Powder Metallurgy Method: M. Zainuri, Anne Z. Dedi. P dan Eddy S
az4.pdf |
Proceeding International Conference on Materials And Metallurgical Technology 2009 (ICOMMET2009), 24-25 Juni 2009 |
|
43 |
Effect of Graphite Addition on Mechanical Properties of Bronze Bearing Cu-Sn-Zn+C Graphite Produced by Powder Metallurgy, Meeting: Materials Science & Technology 2006 (MS&TM06): A.Zulfia dan M.Jatmiko
az2.pdf |
Symposium : Processing for Reliability, TMS, Cincinnati, OHIO, USA |
|
44 |
Pengaruh LiClO4 Pada Pembuatan Komposit Keramik Anoda Grafit
azh.pdf |
Bambang Prihandoko, Priyo Sardjono, Anne Zulfia |
|
45 |
Pengaruh Temperatur Terhadap Kekerasan Komposit Matriks Keramik Produk Directed Metal Oxidation
aza.pdf |
G.N. Anastasia Sahari, Anne Zulfia, Eddy S. Siradj, Moh. Jufri |
|
46 |
Identification of Particle Shape Al, SiC and Al2O3 according Anisometry and Bulkiness Value: Widyastuti, A.Zulfia, Dedi P, Johny W dan Eddy Siradj
azg.pdf |
The 9th International Conference on Quality in Research, (QIR), IMM 21/1-4 |
|
47 |
Physical and Mechanical Properties of Carbon-Carbon Composites Based Coconut Shell Waste : Agus.E.P, Anne.Z, Johny.W.S
|
Journal of Materials Science and Engineering, ISSN 1934-8959, Vol. 5. No. 1, January 2011 (Serial No. 38), pp. 12-19 |
|
48 |
Study of The Electical Conductivity of Oil Palm Fiber Carbon: Nanik Indayaningsih, Anne Zulfia, Dedi Priadi, Sunit Hendrana
|
Advanced Materials Research Vol. 277 (2011) pp 137-142 |
|
49 |
Characterisation of SiC/Al Ceramic Matrix Composite by Directed Melt Oxidation (DIMOX): Anne Zulfia, G. N. Anastasia Sahari, dan Isabella Fiona
az9.pdf |
The 2nd Indonesia Japan Joint Scientific Symposium, (IJJSS 2006) |
|
50 |
Effect Of Temperature and Mg Addition on Characterisation Of Al-Mg/Al2O3 Metal Matrix Composites Produced by Stir Casting: Anne Zulfia, Soulton, Arman
aze.pdf |
The 9th International Conference on Quality in Research, (QIR), IMM 39/1-4 |
|
51 |
Effect of Graphite Addition on Mechanical Properties of Bronze Bearing Cu-Sn-Zn+C Graphite Produced by Powder Metallurgy, Meeting: Materials Science & Technology 2006 (MS&TM06): A.Zulfia dan M.Jatmiko
az8.pdf |
Symposium : Processing for Reliability, TMS, Cincinnati, OHIO, USA |
|
52 |
Effect of wt%Mg on hardness and Wear Resistance of Ceramic Matrix Composites Al2O3 /Al Produced by DIMOX: Anne Zulfia, GN.Anastasia, dan Sofyan Purba
azf.pdf |
The 9th International Conference on Quality in Research, (QIR), IMM 33/1-4 |
|
53 |
Pendekatan Metode Medalia & Metode Hausner dalam Identifikasi Partikel Serbuk pada Proses Metalurgi Serbuk: Anne Zulfia, Widyastuti, Eddy S. Siradj, Dedi Priadi, Johny W. Soedarsono
azb.pdf |
Seminar Nasional Ilmu dan Teknologi Material 2006, ITS, Surabaya |
|
54 |
Pengaruh Temperatur Sinter Terhadap Karakteristik Komposit Matriks Logam Aluminium-Grafit Produk Metalurgi Serbuk: Anne Zulfia dan Ricca Angareini
azd.pdf |
Prosiding Seminar Nasional Ilmu Teknik Material (SNITM), Surabaya |
|
55 |
Shrinkage Analysis on Lamination Area of Laminate Isotropic Composites between Al/SiC and Al/Al2O3: Anne Zulfia, Widyastuti, Dedi Priadi, dan M. Zainuri
azc.pdf |
Proceeding the 5th International Materials Technology Conference & Exhibition, Kuala Lumpur-Malaysia |
|
56 |
The Production of SiC/Al Ceramic Matrix Composite by Directed Melt Oxidation (DIMOX), Meeting: Materials Science & Technology 2006 (MS&TM06): A.Zulfia dan I. Fiona
az7.pdf |
Symposium : Processing for Reliability, TMS, Cincinnati, OHIO, USA |
|
57 |
Electroless Deposition of metal oxide on SiC particles Reinforced for Producing Al-Si /SiC Metal Matrix Composites: Anne Zulfia, Tatu MasaEURTMudah and Syukron Lutfi
|
Advanced Materials Research Vol. 277 (2011) pp 43-50 |
|
58 |
Material Research Society Symposium Proceeding, Advance Fibres, Plastics, Laminates and Somposites, Vol 702, 2002, pp U8.6.1-U8.6.8
|
Infiltration of Al-Mg Alloy Into Sic Preform in The Production of Metal Matrix Composite by Pressureless Infiltration |
|
59 |
Pengaruh Waktu Pengadukan Terhadap karakteristik Komposit Logam Al 6063/Al2O3 Hasil Stir Casting: A. Zulfia dan Jumiadi
|
Prosiding Quality in Research, Pengembangan IPTEK Menyongsong 2010, QIR FTUI 2003, MT-CMP-07,1-6 |
|
60 |
Pengaruh Temperatur Terhadap Struktur Mikro dan Kekerasan Cereamic Matrix Composites (CMC) Al2O3/Al: M. Jufri, G.N. Anastasia, A.Zulfia dan Sutopo
|
Prosiding Quality in Research, Pengembangan IPTEK Menyongsong 2010, QIR FTUI 2003, MT-CMP-08,1-5 |
|
61 |
Pengaruh Vf% Al2O3 Penguat Terhadap Karakterisasi Komposit Logam Al6063/ Al2O3 Produk Pengecoran (Stir Casting): A.Zulfia dan Jumiadi
|
Proceeding Teknologi Material dan Aplikasinya dalam Industri, ISBN 979-96609-1-2, EMINEX-2004, hal.188-196 |
|
62 |
Pengaruh Waktu Tahan Terhadap Kekerasan dan Ketahanan Aus Keramik Matrix Compaoites Al2O3/Al Produk DIMOX: G.N. Anastasia S dan A. Zulfia
|
Proceeding Teknologi Material dan Aplikasinya dalam Industri, ISBN 979-96609-1-2, EMINEX-2004, hal.41-49 |
|
63 |
Pure Al/Al2O3 Metal Matrix Composites Produced by Pressureless Infiltration: A.Zulfia dan R.J. Hand
|
Proceeding Modern Science of Adnvanced Material, International Workshop in Materilas Sciences and Engineering, James Cook University, Australia, 2004 |
|
64 |
Effect of Mg on Characterization of Al2O3/Al CMC Produced by DIMOX with and without Compaction Preform: A Zulfia, GN.Anastasia dan Sofyan Purba
|
Journal of Technology, XVII, ISSN: 0215-1685 |
|
65 |
Effect of Temperature and Mg on characterisation of Al/Al2O3 Metal Matrix Composites Produced by Pressureless Infiltration: A. Zulfia, M. Rahman dan Solahudin
|
The 8th International Conference on Quality in Research, (QIR), pp. MM9-01 |
|
66 |
Effect of Temperature on Characterization of Al6063/ZrO2 Metal Matrix Composites Produced by Pressureless Infiltration: A. Zulfia dan Hardjo
|
The First Jordanian International Conference Proceedings of Material Science & Engineering |
|
67 |
Interfacial Reaction in the system Al/SiC, Al-Mg alloy Matrix Composites Produced by Spontaneous Infiltration: A. Zulfia
|
Materials and Processing Technologies for Revolutionary Application, SAMPE 2005, Seattle, USA |
|
68 |
Pengaruh Mg Terhadap Karakterisasi Komposit Matrix Logam Al/ Al2O3 hasil Proses Infiltrasi Tanpa Tekanan (PRIMEX): M. Rahman, Solahudin, dan A.Zulfia
|
Proceeding Teknologi Material dan Aplikasinya dalam Industri, ISBN 979-96609-1-2, EMINEX-2004, hal.101-110 |
|
69 |
Pengaruh Penambahan Unsur Magnesium Terhadap Karakterisasi Komposit Matrik Logam Al/SiCp Produk Pressureless Metal Infiltration (PRIMEX): Anne Zulfia dan A. Indriasari
|
Prosiding SNTTM IV -2005, pp, 147-152, Denpasar, Bali |
|
70 |
Pengaruh Suhu Pemanasan dan Waktu tahan Terhadap Karakteristik Komposit Matriz Keramik SiC/Al Produk Direted Metal Oxidation (DIMOX): A.Zulfia dan I. Fiona
|
Jurnal Teknologi, disi No.4, Tahun XIX, 308-317 |
|
71 |
The production of Al-Mg alloys into SiC Preform in Production of Metal Matrix Composites: A. Zulfia dan R.J.Hand
|
Journal of Materials Science, Vol 37.No. 5, pp.955-961 |
|
72 |
Infiltration of pure Al into Al2O3 Ceramic preform on production of Metal matrix Composites (MMC): Anne Zulfia
|
Proceeding of the International 7th Indonesian StudentaEURTMs Scientific Meeting,ISSM 2002, ISSN 0855-08692, The Production Technology Centre Berlin,German, pp. 395-404 |
|
73 |
Effect of Hot Isostatic Pressing on Structure and Properties of Cast A357 Aluminium Alloy: Anne Zulfia
|
Journal Teknologi, Edisi No.2, Tahun XI, Juni 1997, ISSN 0215-1685, pp. 116-123 |
|
74 |
Hot Isostatic Processing of Metal Matrix Composites: H.V.Atkinson, A. Zulfia, A.Lima Filho, H.Jones, S King
|
Materials & Design, Volume 18, No. 4/6, Dec 1997, pp. 243-245 |
|
75 |
Effect of Hot Isostatic Pressing on Cast A357 Aluminium Alloy with and without SiC Particle Reinforcement: A. Zulfia, H.V.Atkinson, dan H.Jones
|
Journal of Materials Science, Volume 34, No. 17, Sept 1999, pp. 4305-4310 |
|
76 |
Effect of Magnesium on Producing Pure Al Matrix Composites by Pressureless Infiltration: Anne Zulfia
|
Proceeding of the Science of Technology Meeting UK, Leeds, 6-8 August 1999, ISBN 09536271 1X, pp. 67-77 |
|
77 |
Effect of Processing Temperature on Pure Al/SiC Metal Matrix Composites Produced by The Lanxide Process: Anne Zulfia
|
Journal Teknology, Edisi No.2, Tahun XV, Juni 2001, ISSN:0215-1685, pp. 202-213 |
|
78 |
Infiltration of Al-Mg alloy into SiC perform in the Production of Metal Matrix Composites by Pressureless Infiltration: A. Zulfia dan R.J.Hand
|
Materials Research Society 2001, Fall Meeting electronic proceedings website, Paper Number 4661 |
|
79 |
Infiltration of Pure Al and Al-Mg alloys into SiC Preform in Production of Metal Matrix Composites: Anne Zulfia dan R.J. Hand
|
Proceeding of Advance Fibres, Plastics, Laminates and Composites, Symposium U, 2001 Fall MRS Meeting, Boston Massachusetts, USA |
|
80 |
Role of Mg and Mg+Si as External Dopants in Production of Pure Al-SiC Metal Matrix Composites by Pressureless Infiltration: Anne Zulfia dan R.J. Hand
|
Materials Science and Technology, Vol. 16, July-August 2000, pp. 867-872 |
|
81 |
The Production of Al/Al2O3 Metal Matrix Composites by Pressureless Infiltration: Anne Zulfia
|
Proceeding Global Networking and Research Contributions Towards Indonesian Prosperity, The 6th Intl Indonesian Student Scientific Meeting, Manchester, UK, August 2001 |
|
82 |
The Production of pure Al/SiC Metal Matrix Composites by Pressureless Infiltration: Anne Zulfia
|
Proceeding Global Networking and Research Contributions Towards Indonesian Prosperity, The 6th Intl Indonesian Student Scientific Meeting, Manchester, UK, August 2001 |
|
83 |
Effect of Hot Isostatic Pressing on Al/SiC Metal Matrix Compositel Alloy: Anne Zulfia
|
Journal Teknologi, Edisi No.2, Tahun XVI, Juni 2002, ISSN 0215-1685 |
|
84 |
Infiltration of Al-Mg alloys into SiC Preform in the Production of Metal Matrix Composites by Pressureless Infiltration: A. Zulfia dan R.J.Hand
|
Material Research Society Symposium Proceeding, Advance Fibres, Plastics, Laminates and Composites, Vol 702, 2002, pp. U8.6.1-U8.6.8 |
|
85 |
The Effect of LiO2 Addition On A Quenched Windows Glasses: B. Prihandoko, P. Sardjono, A.Zulfia, dan E. Siradj
|
Prosiding Seminar Nasional Fundamental dan Aplikasi Teknik Kimia 2005, Jurusan Teknik Kimia, Fakultas Teknologi Industri ITS-Surabaya, pp. MB8(1-6) |
|
86 |
The Effect of Sintering Time on Glass Matrix Composites LTAP: B. Prihandoko, P. Sardjono dan A.Zulfia
|
The 8th International Conference on Quality in Research, (QIR), pp. MM6-AC-02 |
|
87 |
Analisa dan Karakterisasi Pembuatan Metal Matrix Komposit (MMC) Al/I+/-Al2O3 Metode Stir Casting dengan memvariasi %Vf dan Putaran: J. Wahyuadi, A. Zulfia dan M. Fauzi Soulton
|
Prosiding Seminar Nasional Teknik Mesin, Aplikasi Riset dan Pengembangan Teknik Mesin Untuk Mendukung Pembangunan Industri Nasional, Universitas Kristen Petra, Surabaya, pp.243-250 |
|
88 |
Characterisation of SiC/Al Ceramic Matrix Composite by Directed Melt Oxidation (DIMOX): Anne Zulfia, G. N. Anastasia Sahari, dan Isabella Fiona
|
The 2nd Indonesia Japan Joint Scientific Symposium, (IJJSS 2006) |
|
89 |
Effect Of Temperature and Mg Addition on Characterisation Of Al-Mg/Al2O3 Metal Matrix Composites Produced by Stir Casting: Anne Zulfia, Soulton, Arman
|
The 9th International Conference on Quality in Research, (QIR), IMM 39/1-4 |
|
90 |
Effect of t%Mg on hardness and Wear Resistance of Ceramic Matrix Composites Al2O3 /Al Produced by DIMOX: Anne Zulfia, GN.Anastasia, dan Sofyan Purba
|
The 9th International Conference on Quality in Research, (QIR), IMM 33/1-4 |
|
91 |
Identification of Particle Shape Al, SiC and Al2O3 according Anisometry and Bulkiness Value: Widyastuti, A.Zulfia, Dedi P, Johny W dan Eddy Siradj
|
The 9th International Conference on Quality in Research, (QIR), IMM 21/1-4 |
|
92 |
Pendekatan Metode Medalia & Metode Hausner dalam Identifikasi Partikel Serbuk pada Proses Metalurgi Serbuk: Anne Zulfia, Widyastuti, Eddy S. Siradj, Dedi Priadi, Johny W. Soedarsono
|
Seminar Nasional Ilmu dan Teknologi Material 2006, ITS, Surabaya |
|
93 |
Pengaruh Temperatur Sinter Terhadap Karakteristik Komposit Matriks Logam Aluminium-Grafit Produk Metalurgi Serbuk: Anne Zulfia dan Ricca Angareini
|
Prosiding Seminar Nasional Ilmu Teknik Material (SNITM), Surabaya |
|
94 |
Shrinkage Analysis on Lamination Area of Laminate Isotropic Composites between Al/SiC and Al/Al2O3: Anne Zulfia, Widyastuti, Dedi Priadi, dan M. Zainuri
|
Proceeding the 5th International Materials Technology Conference & Exhibition, Kuala Lumpur-Malaysia |
|
95 |
The Effect of Composition Variation of LTP on a Quenched Windows Glasses: Bambang Prihandoko, Priyo Sardjono, Anne Zulfia dan Eddy S.Siradj
|
The 9th International Conference on Quality in Research, (QIR), IMM 02/1-5 |
|
96 |
The Production of SiC/Al Ceramic Matrix Composite by Directed Melt Oxidation (DIMOX), Meeting: Materials Science & Technology 2006 (MS&TM06): A.Zulfia dan I. Fiona
|
Symposium : Processing for Reliability, TMS, Cincinnati, OHIO, USA |
|
97 |
: Anne Zulfia danDedi Priadi
|
Proceedings on International Researcher Workshop, organized by KITECH, Vietnam |
|
98 |
Pengaruh Mg Terhadap Karakteristik Komposit Matriks Keramik ZrO2/Al Produk Directed Metal Oxidation (DIMOX): Anne Zulfia, Eko Ontorjo, Dede Bangunsuprayogi, Ihwan Hidayat
|
Seminar Nasional Metalurgi dan Material I 2007, Hotel Makara UI, Depok |
|
99 |
Pengaruh Pelapisan HNO3 Terhadap Densitas Komposit Lamina Isotropik Al/Al2O3 - Al/SiC: Widyastuti, Anne Zulfia, Dedi Priadi, Johny Wahyuadi, EdddA y. Siradj
|
Seminar Nasional Metalurgi dan Material I 2007, Hotel Makara UI, Depok |
|
100 |
: H.V.Atkinson, A.Zulfia, A.Lima Filho, H.Jones, S King
|
Proceeding International Conference on Advanced Materials, ICAMaEURTM97, European Materials Research Society Spring Meeting, E-MRSaEURTM97, in Strasbourg (France) |
|