Prof. Dr. Ir. Bondan Tiara Sofyan, M.Si.

Primary tabs

No	Title of Publication	Journal Name	Delete link
1	Pengantar Material Teknik Edisi 2. Buku ini dapat diakses di: http://upload.ui.ac.id/?a=d&i=357024	Buku
2	Aryya S. Mahardika, Ignatius A. Setiawan, Bondan T. Sofyan, Effect of Cold Rolling and Annealing Temperature on The Characteristics of Cu-28Zn-5.5Al Alloy Produced by Gravity Casting for Bullet Case Application	Key Engineering Materials (2020) Vol. 833, pp. 3-7
3	Inas M. Jauhari, Danny T. Bahar, Syarah K. Nisa, Bondan T. Sofyan, Effects of Cu Addition on Age Hardening Response of Al-7Si-4Mg Alloys at 130 oC kem.833.74_danny.pdf	Key Engineering Materials (2020) Vol. 833, pp.74-79.
4	Imam Basori, Bondan T. Sofyan, Influence of Manganese on Recrystallization Characteristics and Texture Development of Cu-29Zn Alloys msf.1000.412_influencemnrecrystallizationtexturecu29zn_imambondan.pdf	Materials Science Forum (2020), Vol. 1000, pp. 412-218.
5	Irene Angela, Imam Basori, Bondan T. Sofyan, Effect of Cold Rolling and Annealing Temperature to the Characteristics of a + b’ Phases in Cu-29.5Zn-2.5Al Alloy Produced by Gravity Casting publishedmanuscript.pdf	J. Min. Metall. Sect. B-Metall. (2020), Vol. 56 (1) pp. 89-97
6	Rachman Kurnia, Bondan T. Sofyan, EFFECT OF COLD ROLLING AND ANNEALING TEMPERATURE ON THE RECRYSTALLIZATION AND MECHANICAL PROPERTIES OF Al-4.7Zn-1.8Mg (wt. %) ALLOY FABRICATED BY SQUEEZE CASTING r1-mme-680.pdf	International Journal of Technology (2017) 7: 1329-1335
7	A Arisgraha, I Angela, N A Arandana, and B T Sofyan, Effects of aluminum addition on the characteristics of Cu-28Zn brass produced by gravity casting arisgraha_2018_iop_conf._ser.3a_mater._sci._eng._285_012031.pdf	IOP Conference Series: Material Science and EngineeringVol. 285(2018), 012031
8	Imam Basori, Irene Angela, David Jendra, Bondan T. Sofyan, Deformation Characteristics and Texture Development of Biadded Cu-29Zn Alloys basori_2018_iop_conf._ser._mater._sci._eng._378_012015.pdf	IOP Conference Series: Materials Science and Engineering Vol. 378 (2018) 012015
9	Imam Basori, Ruther Gadhu, Bondan T. Sofyan, Effects of Deformation and Annealing Temperature on the Microstructures and Hardness of Cu-29Zn-0.6Bi Brass bondants_kem.748.218.pdf	Key Engineering Materials, Vol. 748 (2017), pp 218-223
10	William Horizon, Syarah Khayrun Nisa, Bondan T. Sofyan, Effect of Cold Rolling and Annealing Temperature on the Characteristics of Cu-28Zn-3.2Mn Alloy horizon_2019_iop_conf._ser._mater._sci._eng._517_012002.pdf	IOP Conf. Ser.: Mater. Sci. Eng. 517 (2019) 012002
11	Desrilia Nursyifaulkhair, Risly Wijarnako, Irene Angela, Bondan T. Sofyan, Effects of the Aging Temperature on the Mechanical Properties and Microstructure of Al-5.1Zn-1.8Mg-0.4Ti wt. % alloy Produced by Squeeze Casting ijmerr_vol8-1-2019.pdf	Int. Journal Mech Eng and Robotics Research, Vol. 8 (1) (2019), pp.92-98
12	Dwi Ayu Nurcahyaningsih, Risly Wijanarko, Irene Angela and Bondan Tiara Sofyan, Effect of Ti Addition to Age Hardening Response of Al-10Zn-6MgxTi Alloy Produced by Squeeze Casting matecconf_icemp2018_02009.pdf	MATEC Web of Conferences, Vol. 186 (2018), 02009
13	Maya Putri Agustianingrum, Nuzulian A. Arandana, Risly Wijarnako, Bondan T. Sofyan Effect of deformation and annealing temperature on the mechanical properties and microstructure of Al-4.5Zn-1.5Mg-0.9Cr (wt. %) alloy fabricated by squeeze casting matecconf_icmme2018_01001.pdf	MATEC Web of Conferences Vol. 153 (2018) 01001
14	Imam Basori, Hafsah I. Pratiwi, Bondan T. Sofyan, Effects of Manganese on the Microstructures, Mechanical Properties and Deformation Characteristics of Cu-29Zn Alloy msf.917.212.pdf	Materials Science Forum Vol. 917 (2018) pp 212-217
15	Dewi Lestari Natalia, Risly Wijarnako, Irene Angela, Bondan T. Sofyan, Influence of Compaction Pressure on Density, Bending Strength, and Microstructures of Al2O3-SiC-ZrO2 Ceramic Matrix Composites with Nb2O5 Additives msf.923.61.pdf	Materials Science Forum Vol. 923 (2018), pp. 61-65
16	Risly Wijanarko, Irene Angela, Bondan T. Sofyan, Effect of Solution Treatment Temperature on Microstructure and Mechanical Properties of Al-5.1Zn-2Mg-0.1Ti (wt. %) Produced by Squeeze Casting msf.939.38.pdf	Materials Science Forum, Vol. 939 (2018), pp 38-45
17	Ansel F. Tambunan, Irene Angela, Imam Basori and Bondan T. Sofyan, Effect of Cold Rolling and Annealing Temperature on the Characteristics of Cu-28Zn-1.1Bi Alloy Produced by Gravity Casting msf.939.73.pdf	Materials Science Forum, Vol. 939 (2018), pp 73-80
18	Dimas Pratamawansyah Putra and Bondan Tiara Sofyan, Effect of Solution Treatment Temperature on The Microstructure and Mechanical Properties of Al-5.1Zn-1.9Mg Alloy Produced by Squeeze Casting pratamawansyah_putra_2018_iop_conf._ser._mater._sci._eng._432_012064.pdf	IOP Conference Series: Material Science and Engineering, Vol. 432 (2018) 012064
19	Socania Titi Nayoka, Nuzulian Akbar Arandana, Dwi Rahmalina, Bondan T.Sofyan, Pengaruh Penambahan Partikel Penguat Zirkonia (ZrO2) terhadap Karakteristik Komposit Bermatriks Al-13.20Zn-6.38Mg-6.67Si-1.38Cu setelah Pengerasan Penuaan untuk Aplikasi Balistik senamm_x_2017_paper_40_socaakbar.pdf	Prosiding SENAMM X, UNDIP, 8 Nov 2017
20	Maseska Fatma Syarida, Risly Wijanarko, Bondan T. Sofyan, Pengaruh Penambahan Cu terhadap Respons Pengerasan Penuaan Komposit Al-8Zn-4Mg Berpenguat SiC Hasil Squeeze Casting senamm_x_2017_paper_42_rislymaseska.pdf	Prosiding SENAMM X, UNDIP, 8 Nov 2017
21	Hesti Ibrahim, Irene Angela, Bondan T. Sofyan, Karakterisasi Pelat Komposit AA5083 Tahan Peluru dengan Penguat Kawat Baja Karbon Tinggi Diameter 1.4 mm Satu Arah Berfraksi Volume 2.5, 5 dan 7.5% senamm_x_2017_paper_47_irenehesti.pdf	Prosiding SENAMM X, UNDIP, 8 Nov 2017
22	Muhammad Syarifudin, Elisabeth Nadya Hale, Bondan Tiara Sofyan, Effect of ZrO2 Addition on Mechanical Properties and Microstructure of Al-9Zn-6Mg-3Si Matrix Composites Manufactured by Squeeze Casting syarifudin_2019_iop_conf._ser._mater._sci._eng._517_012001.pdf	IOP Conf. Ser.: Mater. Sci. Eng. 517 (2019) 012001
23	R F Adiputra, R Wijanarko, I Angela, and B T Sofyan, Effect of SiC Addition to the Characteristics of Al-11Zn-6.7Mg Composite Produced by Squeeze Casting for Ballistic Application Effect of SiC Addition to the Characteristics	IOP Conference Series: Material Science and Engineering
24	Muhammad Syahid, Bondan T. Sofyan, Singgih G. Basuki, Bayu Adam, Characterization of Al-7Si-Mg-Cu Turbine Impeller Produced by Investment Casting, Advanced Materials Research, Vol. 789 (2013) pp 324-329 http://www.scientific.net/AMR.789/6	Advanced Materials Research
25	Dwi Rahmalina, Bondan T.Sofyan, Nararia Askarningsih, Sigma Rizkyardiani, Effect of Treatment Process on Hardness of Al7Si-Mg-Zn MatrixComposite Reinforced with Silicon Carbide Particulate, Advanced Materials Research, Vol. 875-877 (2014) pp 1511-1515 http://www.scientific.net/AMR.875-877/28	Advanced Materials Research
26	Bondan T. Sofyan, Muhammad A. Falah, Effects of Combination of 0.02 wt % Sr and Ti on the Characteristics of AC4B Alloys Produced by Low Pressure Die Casting, Advanced Materials Research, Vol. 875-877 (2014) pp 1255-1259. amr.875-877.1255_icamms12_bondan.pdf	Advanced Materials Research, Vol. 875-877 (2014) pp 1255-1259.
27	Penambahan Penghalus Butir 0.0505 wt. % dan 0.072 wt. % Ti Berbentuk Fluks pada Paduan AC4B Hasil Low Pressure Die Casting (Bondan T. Sofyan, Daniel J. Kharistal , Nike Lestari)	Seminar Nasional Kluster Riset Teknik Mesin, UNS Solo, 13-14 Oktober 2009
28	Pemudaran Penghalus Butir Fluks 0,019 wt.% Ti Pada Paduan AC4B Hasil Low Pressure Die Casting (Dwi Rahmalina, Bondan T. Sofyan)	Seminar Nasional Kluster Riset Teknik Mesin, UNS Solo, 13-14 Oktober 2009
29	Pengaruh Temperatur Aplikasi Terhadap Karakteristik Die Coating 0,12 dan 0,14 mm pada Cetakan Piston Aluminium (Bondan T. Sofyan) btsofyan_jurnal_industriits_final.pdf	Jurnal Industri ITS, Vol. 8 (2009), No. 1, pp. 22-29.
30	Modification of microstructure of AC4B aluminium cast alloys by addition of 0.004 wt. % Sr (Willy Handoko, Bondan T. Sofyan) paper_willy_bondan_qir2009_lowres.pdf	The 11th. International Conference on Quality in Research, FTUI Depok, 3-6 August 2009, pp. 1049-1054
31	Karakteristik Silicone Die Coating dengan Variasi Ketebalan:Studi pada Cetakan Piston Aluminium (Bondan T. Sofyan, Yogi Suprayogi, Fuad Sulaimy) 3_jtm08-33_169-176_ok.pdf	Jurnal Teknik Mesin ITS, Vol. 9 (September 2009) No. 3, pp. 169-176
32	Fading of Al-5Ti-1B Grain Refiner in AC4B Alloy Produced by Low Pressure Die Casting (Bondan T. Sofyan, Lulus Basuki) paper_bondanlulus_qir2009_lowres.pdf	The 11th International Conference on Quality in Research, FTUI Depok, 3-6 August 2009, pp. 832-839
33	Characteristics of Cold Spray Aluminium Coating on ZE41A-T5 Magnesium, AA7075 Aluminium, and 4130 Steel Substrates (Bondan T. Sofyan, Dhiani Satiti, Elena Pereloma) mm-25btsofyandhianiuiindonesiap99-103.pdf	Proc. Int. Conf. Materials and Metallurgical Tech. 2009, ITS Surabaya, 24-25 June 2009, MM99-103
34	Respons Laku Penuaan Paduan Al-9Si-2Cu dengan Penambahan Penghalus Butir Al-Ti Serbuk 0,027 wt. % Titanium (Bondan T. Sofyan, Jati Kusumawardani) bondanjati_senamm2itb_lowres.pdf	SENAMM2 Seminar Nasional Material & Metalurgi 2, ITB Bandung, 20-21 Agustus 2008
35	Respon laku Panas Paduan Aluminium AC4B Dengan Penambahan 0,01 % Berat Sr Melalui Proses Low Pressure Die Casting (Bondan T.Sofyan,Andry Soetiawan,Ragil E.Susanto) btsofyanandryragil_iptekbahan08_pengaruhsrac4b_lowres.pdf	Jurnal Sains Materi Indonesia, Edisi Khusus Desember 2008 ISSN:1411-1098, pp.67-71
36	Precipitation reactions in Al-4.0Cu-0.3Mg (wt.%) alloy (S.P.Ringer,B.T.Sofyan, K.S.Prasad.G.C.Quan) alcumg_acta_08_final_lowres.pdf	Acta Materialia 56(2008), pp.2147-2160
37	Observation on AA319 cast aluminium alloys with various Sn content (Bondan T. Sofyan and Adhi Baskoro) bondanbaskoro_icomast2006_snaa319_lowres.pdf	Proc. Int. Conf. on Manufacturing Science and Technology , August 28-30, 2006, Melaka, Malaysia, pp. 404-407
38	Peran 1 dan 9 wt.% Zn Dalam Proses Pengerasan Presipitasi Paduan Aluminium AA319 (Bondan T.Sofyan, Sari Susanti,Ridwan R.Y) makaravol1212008_bondansariridwan.pdf	MAKARA Seri Teknologi Volume 12 April 2008 Nomor 1 ISSN 1693-6698, pp. 48-54
39	Pengembangan Paduan Aluminium AA 319 (Al-Si-Cu) Dengan Penambahan 3 WT.%Zn : Pengamatan Pada Kondisi Coran Dan Setelah Perlakuan Panas ( Bondan T.Sofyan) btsofyan_jurnalporos_lowres.pdf	POROS Jurnal Ilmiah Teknik Mesin, Volume 11 Nomor 1,Januari 2008 ISSN 1410-6841
40	Penambahan Penghalus Butir 0.0505 wt.% Dan 0.072 wt. % Ti Berbentuk Fluks Pada paduan AC4B Hasil Low Pressure Die Casting ( Bondan T.Sofyan,Daniel J.Kharistal,Ragil E.Susanto)	SENAMM2 Seminar Nasional Material & Metalurgi 2, ITB Bandung, 20-21 Agustus 2008
41	Pemudaran Penghalus Butir Fluks 0,019 wt.% Ti Pada Paduan AC4B Hasil Low Pressure Die Casting (Bondan T. Sofyan, Budi Lesmana, Ragil E. Susanto)	SENAMM2 Seminar Nasional Material & Metalurgi 2, ITB Bandung, 20-21 Agustus 2008
42	Pelapisan Permukaan Dalam Nosel Roket RKX100 dengan Cr2C3-NiCr HVOF: Optimasi Kekuatan Lekat melalui Variasi Kekasaran Permukaan (Bondan T. Sofyan, Yus Prasetyo, Sayid Ardiansyah, Edi Sofyan) btsofyan_jurtek2006_final_lowres.pdf	Jurnal Teknologi, ISSN. 0215-1685, No. 3, Tahun XX, September 2006, pp. 203-208.
43	Role of Sr in Modification of Microstructure of AA333 Aluminium Cast Alloys (Bondan T. Sofyan, Thomas M. Parapat, Antonius Fernando, Andi Puspito ijmet2009_lowres.pdf	Int. J. Materials Eng and Tech, 2009, Vol. 2 (2) (2009), pp. 207-218
44	Modification of Microstructure of Low Pressure Die Casting AC4B Alloy by Addition of 0.015 wt. % Sr (Bondan T. Sofyan, Ragil E. Susanto and Thomas M. Parapat)	Proc. The 9th. Int. Conf. Quality in Research, ISSN. 114-1284, Depok, Indonesia, 6-7 September 2006, pp. IMM 25
45	Respons Laku Penuaan Paduan Al-9Si-2Cu dengan Penambahan Penghalus Butir Al-Ti Serbuk 0,027 wt. % Titanium (Bondan T. Sofyan, Jati Kusumawardani)	SENAMM2 Seminar Nasional Material & Metalurgi 2, ITB Bandung, 20-21 Agustus 2008
46	Bondan T. Sofyan, Pembentukan Endapan Nano pada Paduan Al-Cu Berkekuatan Tinggi eminex_2004_bondan_lowres.pdf	Proceeding Eminex 2004, ISBN 979-96609-1-2, Bandung, 15-16 September 2004, pp. 78-86.
47	Zulaina S. Rahmawati dan Bondan T. Sofyan, Analisis Pengaruh Sr dan Ti Terhadap Ketahanan Korosi Paduan AC4B zulainasari_bondants_ui_smm2011_lowres.pdf	Prosiding Seminar Material dan Metalurgi, Serpong, 3 November 2011, pp. 501-512
48	Abdan Syakuura, Bondan T. Sofyan, Simon P. Ringer, Sifat Mekanis dan Pengerasan Presipitasi Paduan Al-Zn-Mg dengan Variasi Kandungan Cu Selama Ageing pada Temperatur 120 oC majalahmetalurgi2012_bondanabdan_lowres.pdf	Majalah Ilmu dan Teknologi – Metalurgi, Vol. 27 (2), Agustus 2012, pp. 85-94. ISSN. 0216-3188
49	D. Rahmalina, B.T. Sofyan, B. Suharno, E.S. Siradj, Development of Steel Wire Rope aEUR" Reinforced Aluminium Composite for Armour Material Using The Squeeze Casting Process amr.277.27-lowres.pdf	Advanced Materials Research Journal, Vol. 277 (2011), pp. 27-35
50	WC-Co Coatings for High Temperature Rocket Nozzle Applications: An Application Note (Bondan T. Sofyan , Christopher C. Berndt, Marizki Stefano, Haposan J. Pardede) bondants_ijtech2010.pdf	International J. Technology Vol. 1, Issue 1 (2010), pp.48-56
51	Pengaruh Temperatur dan Waktu Tahan Perlakuan Pelarutan Terhadap Pengerasan Penuaan Paduan AC4B dengan Kandungan 0.078 wt % Ti dan 0.02 wt.% Sr (M. Fani Indarto dan Bondan T. Sofyan)	Prosiding Seminar Nasional Metalurgi dan Material IV, Untirta Cilegon, 14-15 Juli 2010
52	Pengaruh Penambahan Unsur Mg pada Daerah Antarmuka Komposit Matriks Aluminium Berpenguat Kawat Tali Baja untuk Aplikasi Material Armor melalui Proses Squeeze Casting (Dwi Rahmalina, Indra Kusuma, Bambang Suharno, Bondan T. Sofyan, Eddy S. Siradj) senamm10_dwibondan_lowres.pdf	Prosiding Seminar Nasional Metalurgi dan Material IV, Untirta Cilegon, 14-15 Juli 2010, pp. 593-599
53	Pengaruh Kombinasi Penambahan 0.1 wt. % Ti dan Variasi 0.003, 0.018, dan 0.025 wt. % Sr terhadap Karakteristik Paduan AC4B Hasil Low Pressure Die Casting (Nike Lestari, Suryadi, Bondan T. Sofyan) senamm10_bondannikesuryadi_lowres.pdf	Prosiding Seminar Nasional Metalurgi dan Material IV, Untirta Cilegon, 14-15 Juli 2010, pp. 448-458
54	Pengaruh Kombinasi Komposisi 0.02 wt. % Sr dan 0.055, 0.078, dan 0.087 wt.% Ti terhadap Ketahanan Aus Paduan Aluminium AC4B (Mashudi Darta, Bondan T. Sofyan,) senamm10_bondanmashudi_lowres2.pdf	Prosiding Seminar Nasional Metalurgi dan Material IV, Untirta Cilegon, 14-15 Juli 2010, pp. 480-490
55	Grain refinement of AA333 aluminium cast alloy by AlaEUR"Ti granulated flux (Bondan T. Sofyan , Daniel J. Kharistal, Lukfawan Trijati, Kaspar Purba, Ragil E. Susanto) grain_refinement_of_aa333_aluminium_cast_alloy_by_al-ti_granulated_flux.pdf	Materials Design Vol. 31 (2010), pp. S36-S43
56	Penambahan Penghalus Butir 0.0505 wt. % dan 0.072 wt. % Ti Berbentuk Fluks pada Paduan AC4B Hasil Low Pressure Die Casting (Bondan T. Sofyan, Daniel J. Kharistal and Nike Lestari) bondannike_krtm09_lowres.pdf	Prosiding Seminar Nasional Kluster Riset Teknik Mesin 2009, Solo, 13-14 Oktober 2009, ISBN 978-602-95597-0-5, pp. 149-154
57	Pemudaran Penghalus Butir Fluks 0,019 wt.% Ti Pada Paduan AC4B Hasil Low Pressure Die Casting (Dwi Rahmalina, Bondan T. Sofyan) bondandwi_krtm09_lowres.pdf	Prosiding Seminar Nasional Kluster Riset Teknik Mesin 2009, Solo, 13-14 Oktober 2009, ISBN 978-602-95597-0-5, pp. 155-159
58	Penambahan Penghalus Butir 0.0505 wt. % dan 0.072 wt. % Ti Berbentuk Fluks pada Paduan AC4B Hasil Low Pressure Die Casting (Bondan T. Sofyan, Daniel J. Kharistal , Nike Lestari)	Seminar Nasional Kluster Riset Teknik Mesin, UNS Solo, 13-14 Oktober 2009
59	Pemudaran Penghalus Butir Fluks 0,019 wt.% Ti Pada Paduan AC4B Hasil Low Pressure Die Casting (Dwi Rahmalina, Bondan T. Sofyan)	Seminar Nasional Kluster Riset Teknik Mesin, UNS Solo, 13-14 Oktober 2009
60	Characteristics of Cold Spray Aluminium Coating on ZE41A-T5 Magnesium, AA7075 Aluminium, and 4130 Steel Substrates (Bondan T. Sofyan, Dhiani Satiti, Elena Pereloma)	Proc. Int. Conf. Materials and Metallurgical Tech. 2009, ITS Surabaya, 24-25 June 2009, MM99-103
61	Penguasaan Teknologi Aluminium untuk Meningkatkan Daya Saing Bangsa	Penerbit: Lembaga Penerbit FEUI, ISBN. 978 979 24 5281 5
62	Modification of Microstructure of Low Pressure Die Casting AC4B Alloy by Addition of 0.015 wt. % Sr (Bondan T. Sofyan, Ragil E. Susanto and Thomas M. Parapat) qir2006_bondan.pdf	Proc. The 9th. Int. Conf. Quality in Research, ISSN. 114-1284, Depok, Indonesia, 6-7 September 2006, pp. IMM 25
63	Bondan T. Sofyan, Yus Prasetyo, Sayid Ardiansyah, Edi Sofyan, Pelapisan Permukaan Dalam Nosel Roket RKX100 dengan Cr2C3-NiCr HVOF: Optimasi Kekuatan Lekat melalui Variasi Kekasaran Permukaan	Jurnal Teknologi, ISSN. 0215-1685, No. 3, Tahun XX, September 2006, pp. 203-208.
64	Bondan T. Sofyan, Haposan J. Pardede, Marizki Stefano, Edi Sofyan, 2003, Modifikasi pengujian kekuatan lekat lapisan HVOF thermal spray dengan serbuk WC pada nosel roket	Prosiding Seminar Nasional Iptek Dirgantara VII, Serpong, 11 Desember 2003
65	Bondan T. Sofyan, Marizki Stefano, Haposan J. Pardede, Edi Sofyan, 2003, Studi proses persiapan permukaan HVOF thermal spray dengan serbuk WC untuk nosel roke	Publikasi Ilmiah Seminar Nasional Iptek Dirgantara VII, ISBN 979-8554-71-X, Serpong, 11 Desember 2003, p.61-65
66	Bondan T. Sofyan, 2003, Peran Zn dalam Proses Penuaan Paduan Al-Cu-Mg-Ag pada Temperatur 150 AC	Prosiding Quality in Research 2003, ISSN 1411-1284, Depok, 1-2 October 2003, p. MT-HT-11-1-5
67	Bondan T. Sofyan, Achmad Yunianto and Agung Dewanto, 2003, Komposit Serat Gelas / Poliester: Kekuatan Tarik dan Model Perpatahan simposiumpolimer_juli2003_bondanui_lowres.pdf	Prosiding Simposium Polimer IV, ISSN 1410-8720, Jakarta, 8 Juli 2003, p. 85-90
68	Bondan T. Sofyan, 2002, Pengaruh Pemaduan Mikro dengan Cd terhadap Proses Pengendapan pada Paduan Al-1,7Cu-0,3Mg (at. %)	Jurnal Sains Materi Indonesia, Vol. 4, No.1, pp. 41 aEUR" 46.
69	B.T. Sofyan and S.P. Ringer, 2002, Precipitation Processes in Al-4Cu-(0.3Mg, 0.5Cd) wt. % alloys	Proc. Int. Conf. Electron Microscopy, Johannesburg, South Africa.
70	B.T. Sofyan, I.J. Polmear and S.P. Ringer, 2002, Precipitation processes in Al-4Cu-(Mg, Cd) (wt. %) alloys	Mater. Sci. Forum, Vol. 396-402, pp. 613-618
71	B.T. Sofyan and S.P. Ringer, 2001, Effects of Cd on nucleation and precipitation in an Al-4Cu-0.3Mg-0.5Cd (wt. %) alloy bondansimon_imea2001_alcumgcd_lowres.pdf	Proc. Engineering Materials 2001, Melbourne, Australia, pp.53-58.
72	B.C.Muddle, L. Bourgeois, A. Shekhter, B.T. Sofyan, G.B. Winkelman, S. Kim, J.F. Nie, K. Raviprasad, S.P. Ringer, Aggregation and segregation processes in engineering alloys: Direct observation at the atomic scale by 3D atom probe field ion microscopy	Proc. Engineering Materials 2001, Melbourne, Australia, pp. 107.
73	B.T. Sofyan, K. Raviprasad and S.P. Ringer, 2001, Effects of microalloying with Cd and Ag on the precipitation process of Al-4Cu-0.3Mg (wt. %) alloy at 200 AC micron322001_bondanravisimon.pdf	Micron, Vol. 32, pp. 851-856
74	Bondan T. Sofyan, 2001, Evolusi Mikrostruktur Paduan Al-Cu-Mg-Cd selama Proses Penuaan (Aging) pada Temperatur 200 AC	Jurnal Teknologi, Edisi No. 2, Tahun XV, pp. 214 aEUR" 221
75	Bondan T. Sofyan, K. Raviprasad, Simon P. Ringer, 2000, Observations of the effects of Zn on precipitation processes in an Al-Cu-Mg-Ag base alloy	Materials Science Forum, 331-337, pp. 977-982
76	B.T. Sofyan and S.P. Ringer, 1999, Preliminary study of the effects of 0.5 at. % Zn addition to Al-1.7Cu-0.3Mg-0.1Ag (at. %) alloy	Contemporary Research in Physical Metallurgy, Monash University, Melbourne, Australia.
77	Bondan T. Sofyan, Marizki Stefano, Haposan J. Pardede, Edi Sofyan, 2004, Optimization of HVOF Thermal Spray Coating for Rocket Nozzle Application	Proc. 7th Int. Conf. Quality in Research 2004, ISSN 1411-1284, Depok 4-5 August 2004, p.MM-004.1-5
78	Bondan T. Sofyan, Yus Prasetyo, Sayid Ardiansyah, Edi Sofyan, Pelapisan Permukaan Dalam Nosel Roket RKX100 dengan Cr2C3-NiCr HVOF: Optimasi Kekuatan Lekat melalui Variasi Kekasaran Permukaan	Prosiding Seminar Nasional Iptek Dirgantara VIII, Serpong, 6 Oktober 2004
79	Bondan T. Sofyan and Ronald Yohansen, Karakterisasi Paduan Aluminium Al-Si-Cu dengan Kandungan 1 wt. % Sn pada Kondisi As-Cast dan setelah Pengerasan Penuaan	Prosiding Seminar Nasional Ilmu dan Teknik Material 2006, ITS, Surabaya, Indonesia, 19 September 2006.
80	Bondan T. Sofyan and Ferza Nurina, Pengaruh 12 wt. % Zn terhadap Porositas dan Karakteristik Laku Penuaan Paduan Aluminium AA319	Prosiding Seminar Nasional Tahunan Teknik Mesin V, ISBN. 979-97726-8-0, Universitas Indonesia, 21-23 Nopember 2006, pp. M3-042/1-7.
81	Bondan T. Sofyan, Yogi Suprayogi, Fuad Sulaimy dan Hartono, Karakteristik Silicone Die Coating dengan Variasi Ketebalan:Studi pada Cetakan Piston Aluminiu	Prosiding Seminar Nasional Metalurgi dan Material (SENAMM) 2006
82	Bondan T. Sofyan, Felix Natanael, Glen A G, Hartono, Karakteristik Die Coating 0.12 dan 0.14 mm pada Cetakan Piston Aluminium: Pengaruh Temperatur Aplikasi	Prosiding Seminar Nasional Metalurgi dan Material (SENAMM) 2006
83	Bondan T. Sofyan dan Widya Chrysanti Puspitasari, Pengembangan Paduan Aluminium AA 319 (Al-Si-Cu) Dengan Penambahan 3 wt.% Zn : Pengamatan Pada Kondisi Coran Dan Setelah Perlakuan Panas bts3.pdf	Prosiding Seminar Nasional Metalurgi dan Material (SENAMM) 2006.
84	Bondan T. Sofyan, Sari Susanti, dan Ridwan R. Yusfranto, Peran 1 dan 9 wt. % Zn dalam Proses Pengerasan Presipitasi Paduan Aluminium AA319	Jurnal Makara, submitted, 2007
85	Bondan T. Sofyan, Budi W. Utomo and Merindra B. Setyawan, 2005, Characteristics of AC2B Aluminium Alloy Modified with 2.0 wt. % Sn	Proc. Int Conf. on Recent Advances in Mechanical & Materials Engineering, ISBN 983 41728 26, Kuala Lumpur, Malaysia, 30-31 May 2005, p. 555 - 560.
86	B. T. Sofyan, B. W. Utomo, A. Baskoro, R. Kartika, J. R. Ricardo, M. B. Setyawan, S. Surya and R. Yohansen, 2005, Effects of Sn Content on the Characteristics of 319 Aluminium Alloys	Proc. 9th Aluminium Cast House Conference, ISBN 0 643 09135 1, Melbourne, Australia, 12-15 September 2005, p.153-160
87	Bondan T. Sofyan and Budi W. Utomo, Development of Light Alloy Materials for Automotive Application	Proc. ITSF Seminar on Science and Technology, Jakarta, 2 February 2005
88	Bondan T. Sofyan, Marizki Stefano, Haposan J. Pardede, Edi Sofyan, 2005, Characteristics of HVOF Coating used for Rocket Nozzle Application	Materials Forum, ISSN. 1447-6738, Vol. 29, p. 147-151.
89	Bondan T. Sofyan, Aris Risdiyanto dan Edi Sofyan, 2004, Analisa Kelayakan Material Tabung Bahan Bakar Roket RKX100	Jurnal Teknologi, Edisi Khusus No. 3, Tahun XVIII, Okt. 2004, pp. 14 aEUR" 20, ISSN. 0215-1685
90	Bondan T. Sofyan, Marizki Stefano, Haposan J. Pardede, Edi Sofyan, 2004, Pengaruh Kekasaran Permukaan terhadap Kekuatan Lekat dan Struktur Mikro Lapisan WC-Co hasil HVOF Thermal Spray	Jurnal Teknologi, Edisi No. 4, Tahun XVIII, Desember 2004, pp. 291-297, ISSN 0215 aEUR" 1685.
91	Bondan T. Sofyan, Advancement in High Strength Aluminium Alloys: Formation of Nanoprecipitates through Microalloying	Proceedings of Indonesia aEUR" Japan Joint Scientific Symposium 2004, Chiba, Jepang, 20 aEUR" 22 October 2004, pp. 381-386.
92	Bondan T. Sofyan, R. Suratman and Desianti A. Budiwati, 1998, Bending residual strength after impact loading of wet-laminated sandwich construction	The Third Pacific Rim International Conference on Advanced Materials and Processing (PRICM 3), Hawaii, pp. 2817 aEUR" 2824
93	Bondan T. Sofyan, R. Suratman and Dewi Trisnawati, 1997, Kekuatan lentur sisa komposit serat gelas laminasi basah setelah pembebanan impak,	Jurnal Teknologi, Edisi No. 2, Tahun XI, pp. 101 aEUR" 105
94	Bending residual strength after impact loading of wet-laminated sandwich construction (Bondan T. Sofyan, R. Suratman and Desianti A. Budiwati)	The Third Pacific Rim International Conference on Advanced Materials and Processing (PRICM 3), Hawaii, pp. 2817-2824
95	Preliminary study of the effects of 0.5 at. % Zn addition to Al-1.7Cu-0.3Mg-0.1Ag (at. %) alloy (B.T. Sofyan, S.P. Ringer)	Contemporary Research in Physical Metallurgy, Monash University, Melbourne, Australia.
96	Evolusi Mikrostruktur Paduan Al-Cu-Mg-Cd selama Proses Penuaan (Aging) pada Temperatur 200 AC (Bondan T. Sofyan)	Jurnal Teknologi, Edisi No. 2, Tahun XV, pp. 214-221
97	Pengaruh Pemaduan Mikro dengan Cd terhadap Proses Pengendapan pada Paduan Al-1,7Cu-0,3Mg (at. %) (Bondan T. Sofyan) bondan_batansainsmateri_2002_final.pdf	Jurnal Sains Materi Indonesia, Vol. 4 (2002), No.1, pp. 41-46.
98	Precipitation Processes in Al-4Cu-(0.3Mg, 0.5Cd) wt. % alloys (B.T. Sofyan and S.P. Ringer) abstract_bts_spr_icem.pdf	Proc. Int. Conf. Electron Microscopy, Johannesburg, South Africa, 2002
99	Precipitation processes in Al-4Cu-(Mg, Cd) (wt. %) alloys (B.T. Sofyan, I.J. Polmear and S.P. Ringer msf_396-402_p613_bondanpolmearringer_alcumgcd.pdf	Mater. Sci. Forum, Vol. 396-402 (2002), pp. 613-618
100	Advancement in High Strength Aluminium Alloys: Formation of Nanoprecipitates through Microalloying (Bondan T. Sofyan) bondants_chiba_2004_lowres.pdf	Proceedings of Indonesia-Japan Joint Scientific Symposium 2004, Chiba, Jepang, 20-22 October 2004, pp. 381-386.

Pages